Many animal farms and private entrepreneurs are increasingly paying attention to rabbits. Breeding these fluffy animals is a fairly profitable lesson. If you can put it, almost waste, because the lips of rabbits are highly appreciated in agriculture as a fertilizer.
Types of cells for rabbits
A single-section cell variant is a spacious aviary with doors, equipped with drinkers and troughs. The room is designed for one individual or if the section is large, the walking of young people. The cell for the rabbit single-section is convenient when the animals are diluted in small quantities for their needs.
Did you know? Rabbits are considered to be silent, but these animals often use different sounds explaining their condition. Satisfied, the peaceful rabbit publishes purring sounds, pleasure can be designated short-clicking, aggression can signal the growl or stroke, the fear indicates the knocks with teeth, and if the fluffy shouts, it means it hurts him.
Cells consisting of two sections are separated by a grid feeder made in a V-shaped form. In such a bunny house, you can contain a pair of animals, opening the damper between sections with the planned mating.
Cells consisting of three sections allow you to contain three individuals (male and two females), there are opening flaps between sections. To the male, living in the central section, if necessary, you can let one of the females. After communication & - again divided.
Cell-type cell "Klenovo - Chegodaevo"
The design of these cells is a long - 240 cm wide - 65 cm. Material for the manufacture of sexes in such cells - a tree, a solid sheet or a retracted way. Feeders and drinkers are inside the cells on the floor. There are plug-in boxes that are used as castresses with removable feeders and bowls for kids.
Important! Little rabbits to adult food teach gradually. The kids are clutch carrots, weave the grain and give a small gentle hay.
The comfortable design of the bunk mini-farm has developed and embodied I. N. Mikhailov. There are two floors of cells on the stand-stand. The roof is made from translucent materials.
The device of feeders and drinkers allows for animal feeding and water for a week. Such a device of bunk cells for rabbits is convenient for those who cannot give time to animals daily. 
Cells design Zolotukhina
The design of the Goldenhina is a three-tier aviary, two sections on the tier. The upper tiers are shifted to the width of the grid of the lower floor obliquely, a peculiar protrusion of the floor of plywood or from a flat slate sheet.
Stationary Musician is not provided: For females with the rating, the portable Nora is inserted into the winter. In the summer period, the female with rabbits is located in Sene, but is separated by a partition from other animals.
The feeder in the form of a tray is inserted into the frame of the door, which allows you to pour food without opening the door.
Does it make sense to acquire an industrial cell
With large-scale rabbit-breeding cells for factory production rabbits save time on self-making cells. Such cells have a lot of advantages: a clear design, equipping comfortable drinkers and feeders, pallets for feces, sockets for individual individuals.
In factory grids there are comfortable castresses for females with the ranks. Drawings of crawls are constantly being improved, designs are complemented by innovative ideas, more convenient and rational developments of both cells themselves and various livelihoods for animals are invented.
The lack of factory cells in a frequent marriage in the production of any details of the house, the discrepancy of the cell size with the future location location.
On the other hand, with an independent manufacture of cells for home bunnies, the size of the cells are measured with the space of their further location. Depending on the number of animals, the type of cell is selected, the placement of partitions, dolls, feeders.
It is possible to choose a more convenient material for you in the manufacture of both cells and the pallet, feeders, and other things.
Making cells with their own hands
Before making housing for animals, it is necessary to determine the size of the premises: For adult males, females and cubs, for each individual, rabbits are determined by the Method for normal development and maximum convenience.
Professionals advise to calculate the area of \u200b\u200bpacks for rabbits so that at least 0.12 meters squares accounted for one adult. It is advisable to immediately foresee all the nuances: partitions, location of drinking and feeders, the location of the pallets.
Three-tiered cells for rabbits will be optimal for a large number of animals, in the drawings of the project will easily fit and nursery for young people, and individual sections for males and females.
The advantage of similar shades in a significant savings of space, in the ability to establish a construction on the street and in the economic room.
Interesting!Newborn rabbits are bare and blind, and already for the twentieth day of life can eat on their own.
Choosing a place for cells
It doesn't matter what kind of design you have conceived: small cells for rabbits or three-tiered sheds, most importantly - correct selection of space.
The best place for aviary will be slightly shaded plot, for example, in the garden among trees. In this case, animals will be protected from drafts and overheating.
Professional rabbits advise to contain fluffy pets precisely in street conditions: animals produced immunity to diseases, the quality of wool is improved, as well as the reproductive function and endurance of the rating.
A good option is a large economic room with a speaker visor who will create additional protection against precipitation and direct sun rays. With street content, take care of cell insulation in the winter period.
Two-storey cells for rabbits can be located indoors. In this case, carefully think over the removal of life products: animals should not fall from the smell of their own feces.
Size and drawing
The dimensions of the alleged premises depend on the breed of animals and their quantities (take into account the range). The average premises have such dimensions:
- length - 120-150 cm;
- width - 60-80 cm;
- height of wall - 35-50 cm.
When developing a drawing, consider the houses for females with the ranks and premises for young people, consider the location of the feeders and drinking, convenience for you when cleaning the cells, partitions opening for mating.
Think how to insulate outdoor animal room. You may like the idea of \u200b\u200ban extension to the main wagon lodge from the grid.
Required tools and materials
For the construction of cells it is better to use natural materials for the main details of the room: wooden bars, boards and rails, plywood sheets.
For the roof of the houses, it is desirable to use a slate base, not metal. Metal sheets are quickly heated, as well as freeze in winter.
For individual details you will need: Galvanized mesh, door hinges, hooks and steps for doors. Tools and minor details:
- scissors for metal;
- self-tapping screw and screwdriver;
- nails and hammer;
- passatia;
- bulgarian, saw;
- roulette, pencil and level.
Attention! The design of street cells should be reliable from penetration of predators: foxes, dogs or rats.
Build a cage: Step by step instructions
After you have decided on sizes, you chose the necessary materials and prepared tools, you can start construction. To work easier to be easier, consider the offered you step by step instructions for manufacturing cells for rabbits:
- The first action will be the production of a frame from BRUSEV. Measure the desired size and quantity according to the drawing. Collect the frame, strengthen and check the reliability of the base.
- Wood floor. The floor is recommended to make grid or from thin rivers so that the waste does not accumulate in the section. With street content, the floor can be done double. For the convenience of cleaning under the floor, install pallets.
- For the rear walls, sheets or boards are used, you can make them slightly shorter than the front, then there will be no precipitation on the inclined roof.
- The side walls are better made of wood without cracks, and internal - from the grid. In a two-section room, a feeder is installed in the middle.
- For the front walls, plywood or boards will suit, the doors can be made of wooden ridges with a grid. Doors fasten and check how easy they open.
- The roof for the enclosure is better to make removable, it is easier to clean in the cells. Material - slate. In the manufacture of the roof, refer to the canopy.
In this article, step-by-step production of rabbit cells is designed for any option of the house for animals, as general instructions are given during construction. Rabbits are very gentle animals, and the better care and careful care and content, the more return.
Was this article useful?
Well no