When growing rabbits in the home and farming, it is more convenient to use cells made of steel grid. The mesh design is easier to clean and disinfect, it takes less space, plus animals do not bite it. Making cells for rabbits from the grid can be alone. You only need to choose the correct materials, and draw drawings.

Before starting the assembly of mesh cells for rabbits, it is necessary to decide where they will be installed. The design of the constant content of the eared pet depends on the design of their house. Rabbit cells are separated from the grid into two types:

• The frameless cell is characterized by compact sizes. Such a house is convenient to use when the animal content is indoors. Made a cell from one grid, after which it is installed on a solid stand.
• With the street content of rabbits for the manufacture of housing, a framework technology is applied. First, from wooden or metal blanks are collected by the frame, and then weave it with a grid. In frame cells, the roof is necessarily provided.

Any mesh structures can be installed in one, two or three tiers. The battery can be raised above, the main thing is to conveniently take care of rabbits.

The video shows a three-cage:

Dimensions and drawings of cells for rabbits

Deciding with the place of the maintenance of rabbits and the design of the house, it is necessary to make drawings. But first you need to calculate the size of the cell. Young on the bottom contain groups of 6-8 heads. Sometimes farmers increase the amount of rabbit to 10 individuals. At one such animal, 0.12 m² of free square is given. The young man left on the tribe contains 4-8 individuals, reducing them 0.17 m² of free space.

The optimal sizes of the cell for one adult rabbit make up 80x44x128 cm. The dimensions are indicated in the sequence: width, height and length. Accommodation for rabbits is made according to the fact that the sizes of 40x40 cm should be placed inside, and 20 cm high. In principle, the cells proposed by the size of the cells will be enough. An example of a frame design for rabbires with the ranks is shown in the photo.

Important! The grid cell for rabbits is not suitable. In the extreme case, the Musician attach the side as a separate design.

When drawing up a mesh cell circuit, it is necessary to provide a stand, the location of the door, drinkers, grain and grass feeders. In the photo you can see the drawing of the frameless design on the stand with sizes.

And in this photo shows a diagram of a cellular battery. The most complex element of the design is steel frame. Such models are more often used in farms.

Select the grid

Judging by the photo a variety of nets on the market is large, but not every suitable for rabbit cells. From the plastic version it is necessary to immediately refuse. Such a mesh eared pets sprinkle even on the ceiling, and under their feet, she quickly stretches and break through. The best option is a metal mesh, the cells of which are fixed by point welding. Such a method of fixing gives strength to material. However, for rabbits, not any mesh is needed, but a minimum of 2 mm thick made from a wire.

For steel grid, a protective coating is characterized. It is galvanized or polymer. There are still grids from a stainless steel and, in general, without a protective coating. Optimally choose for galvanized cell. Stainless steel and grid with polymer coating expensive will cost the owner, and the material without a protective layer quickly rotates.

Important! The aluminum grid in the manufacture of cells does not apply, even if the lattice is made for the feeder, in which the grass will be loaded. The soft metal is quickly deformed, which is formed by large cells. Through them can fall out rabbits or an adult score stuck head.

Let's look at what mesh is used in the manufacture of different cell elements:

• The floor grid is used with the size of the cells of 20x20 mm, or 16x25 mm. Adult features are suitable material with cells 25x25 mm. At the same time, the minimum cross section of the wire is 2 mm.
• The walls are made of a grid made of wire with a cross section of 2 mm. The optimal cell size is 25x25 mm.
• The ceiling is made of thick grid with large cells. Optimulated with wire with a cross section of 3-4 mm. Cells can be 25x150 mm.

The sizes of cells can be selected individually, which depends on the breed of the ramp and their age. For example, for adult giants, you can make a cell from a grid with larger cells.

Important! The high-quality grid for the manufacture of cells should have the correct geometric shape of the cells. Curved wire makes it clear about the violation of production technology. Cells of such a grid are able to touch around, and there may also be damage to the protective coating.

Independent production of cells for rabbits

Now we will look at how to make an independently cage from the grid. The process is simple and under the power to any owner. So, the course of work is as follows:

The video shows the cell assembly:

In the manufacture of any type of housing for rabbits, it is impossible to use materials in which there are plastic. Animals love to nibble. Fucking plastic in the rabbit stomach will cause indigestion, and the eared pet can even die.