Rabbit breeding with a good organization of the process is a fairly profitable occupation. Rabbitov tries to create optimal conditions for their pets at a minimum cost. This contributes to independent harvesting of feed, the manufacture of feeders and cells. Consider in detail how to make cells for home rabbits with your own hands for young and adult individuals.
Preparation
Make cells for rabbits with your own hands is not so difficult. First of all, it is necessary to decide on the design and size of homemade cells, draw the drawings. Based on the selected parameters, the material is purchased, the necessary tools are prepared. In order to better understand how to make a cage for rabbits with your own hands, you can explore video materials and photos.
The most common option for the content of fluffy pets is double double section cells for rabbits. They are perfectly suitable for the content of young. Other constructions are found:
- single-section;
- three-section;
- group for young;
- mini Farm Mikhailova;
- mini Farm of Zolotukhina.
Determine with sizes and make a drawing
The sizes of cells for rabbits depend on age, size, rocks of animals and their quantities. On average, dina-120-150 centimeters are used, 60-80 centimeters wide, the wall height - 35-50 centimeters. For young, sizes can be reduced by Deine to 90 centimeters. At the same time it is believed that one adult part should account for at least 0.5-0.7 square meters. Minimal norms for young make up 0.1-0.2 square meters.
Rabbit on fattening often contain together, so you can build a separate house for young people. Rabbit and recently born offspring also contain together. In this case, the space of the house, according to the instructions, is divided into the main and uterine compartment. Males hold separately.
You should not make cells for rabbits too close, low activity can badly affect the health of animals. This is especially bad for young.
By determining the size of the cells, it is necessary to make the drawings of the selected design. It should be borne in mind that the cells are better to do on elevation from the Earth. It will serve protection against rodents, facilitate the care of the premises. In order to save space, two-section structures can be made bunk. Overview of different types of cells can be seen on the video.
We prepare the material
In order to build cells at home, it is necessary to prepare the material. It is important to worry about it to be natural and safe. Therefore, it is recommended to purchase wooden bars, boards, or fat fan, rails for construction. In addition, you will need galvanized mesh, roofing materials, self-tapping screws, nails, iron sheets, door loops, spiing things or hooks on the doors.
Instruments
Building houses for animals at home will help the following tools: hammer, drill, saw, plans, screwdriver, roulette, pliers. Depending on the selected design, other devices may be needed. Learn more about materials and tools to create animal houses. Look at the video.
Step by step instructions Building
Prepare all the required tools and materials can be proceeding for the production of cells for rabbits with their own hands. Step-by-step instructions will help even beginners to properly build houses for these animals at home. First of all, it is necessary to make a frame from BRUSEV. Then the floor should be used. Usually it is made from a grid or ridges so that the feces of animals do not accumulate on the surface.
If animals are found on the street, you can make a double floor, insulate it. Some are offered to make removable pallets under the main floor, to make it easier to clean. The next step will be the installation of the rear walls of the structure. For this you will need plywood or boards. It is recommended to make them shorter than the front.
Walls can also be made from the grid, but rabbits are more comfortable in more closed rooms. Therefore, the side walls should also be done deaf. In the two-section cell, the partitions are made in the middle and install the firing-dental. The front wall can be made of mesh or plywood, boards. It needs to install doors from the rails and grids or solid.
If the animals are held all year round on the street, then you need to take care of creating warm rooms. The maintenance at home allows a lightweight version of the house from the grid. When creating portable cells, they are created comfortable, both for street and home content. If designs with multiple tiers are used, there should be a distance between them.
The roof must be made with small cans. It can also be performed from plywood. However, it must be coated with slate or other roofing material for street content. Metal is not recommended, because it can freeze or warm too much. Experienced rabbits advise to make it removable or on the hinges, which simplifies the process of cleaning.
What is placed inside the cells
Depending on which rabbits are contained in houses, their filling may differ. During the content of rabbits and youngsters together, the pancakes and nesting boxes are installed inside. In cells for group content of young, nesting boxes, warm rooms are also installed. Sometimes they make special covered enclosures for walking. For animals of any age, firing feeders are made, bunkers, drinkers.
Finishing strokes
Constructed houses for rabbits at home, I want to keep them longer. However, it is not recommended to handle wood with varnishes or special impregnations. Fluffy animals love to nibble and can be poisoned by such chemicals. For better preservation of houses, you can beat them from the inside with metal sheets. After completing all the work, you must once again examine your construction and check it for animal security.