Rabbits are unpretentious, their breeding for dietary meat, fluff, fur has its advantages over the rest of the animal husbandry.

Cages for rabbits can be installed in the yard

For winter, pets are not required special premises. Cells for rabbits can be installed in the yard. Frost animals are not afraid, only drafts are terrible for them.

Features of rabbits that need to be taken into account when developing cell drawings

Cage for rabbits should be spacious so that the animal remains the opportunity to move

1. Rabbits are afraid of wind, from which they always try to hide. From the leeward side of the cell should be a wooden wall. Provided that the open area is selected for their installation, it is better to close the northern and north-west side.
2. When the content of females and males in one room, the growth of young people will be unregulated. Therefore, diverse rabbits contain together only when planning offspring. In the usual conditions of animals of different sexes are kept separately.
3. The rabbit and adult male should not be held together, the offspring will be eaten.
4. The rabbit takes care of the babies for 3 weeks, after that time they need to plant them from the mother liquor into a separate cell.
5. Musician, as a rule, is done on the territory of rabbits - this is the second room made of wood, plywood. Straw gives excellent insulation. The nest for the kids female will make himself. From the owner you only need to blow the place in which it will feel safe.

Cage for rabbits should be spacious so that the animal remains the opportunity to move. The overall semi-natural individuals become lazy and incapable of reproduction. In most part, this statement belongs to the males.

Breed rabbits are different, depending on their aggressiveness, for males you can arrange large enclosures, calculated on several individuals. Giants and representatives of aggressive breeds are best kept in separately. The optimal place for one adult individual will be 70 per 50 square meters. m.

How to make a cage for rabbits with your own hands: Step-by-step instructions with sizes

Due to the difference in the size of the body of rabbits of different breeds, the purchase of industrial cells may be inappropriate

In view of the difference in the size of the body of rabbits of different breeds, the purchase of industrial cells may be inappropriate. For ordinary rabbits and their relative-giants having a labrador dimensions, both the height and the length of the room cannot be the same. Before building a cell, it is necessary to watch the characteristics of the breed planned for breeding.

Step-by-step instructions for the manufacture of all cells looks equally:

1. It is going to a steady base, raising a house above the ground and giving the stiffness of the design. It can be performed from wood, but faster it will be possible to collect it from metal products. This material does not rot, and the design assembled on the bolts is easier to repair. The larger and moving rabbits, the greater the likelihood of loosening the design.
2. The assembly of individual elements is made, the frames for doors are labeled, the metal grid is squeezed.
3. Installation of floors and walls are made to the base, the ceiling is made.
4. The roof lies with rubberoid or slate.

The skeleton for cells indoors with an earth's floor should lift the house at least 30 cm. When the animals are kept on the street, the pillars are used higher. For a multi-storey house, height is 140 cm, which is convenient when caring for animals and cleaning rooms. For multi-storey minimum permissible height - 70 cm.

House for 2 Adult Rabbits with Motitery

The easiest house for a pair of rabbits consists of two cells. For the manufacture you will need:

• Metal profiles for the manufacture of floor frame.
• Boards for deaf back and side walls.
• Reiki for flooring floor cells.
• Metal mesh for doors and parts of the front wall.
• Two metal columns. They will be required to strengthen the house in the ground and lifting it to the height above the meter.
• Plywood will be required for the manufacture of the Musician.

When developing drawing, you need to take into account the height of the ceilings. It can not be less than 45 cm. The widths of 1.5 meters are enough to make two spacious cells, for rabbit and rabbits. The female half can be done somewhat wider, dividing it into two unequal rooms. The width of the mastercraft 35 cm, the length is 40 cm. This place is enough to accommodate kids after okrol. The first 20 days that they will be under the care of the mother, they will not need a lot of space.

When transplanting to a separate VOLER from rabbits, there can be no less than 12 square meters space per rabbit. See rabbits grow quickly, so nursery is better to make more accomplished. To do this, you can make a two-story house. This is the easiest option from those that can be made with your own hands.

Cage for rabbits according to Mikhailov method

Cell drawing on Mikhailov

Features of the rabbit house Mikhailov are heated by the Musicians and Drins, the presence of feces in a special container. Dominics on this system are made single-storey and two-storey, which depends on the need to place one or two pairs of adult animals.

1. House width - 240 cm.
2. The height is single-tier - 210 cm, while the height of the cells is only 70 cm.
3. 140 cm height to cells is a massive base part under which the collection of animals and inclined gutters are located for its collection.
4. The penetration feature is that they are attached to the protruding inclined parts of the sumps and feeders.
5. Musicians: Width - 35 cm; Length - 40 cm.
6. Cut: Width - 30 cm; Length 12-15 cm.

The floor of the cells collected from the rails. Elements are not fitted close, but after a certain period. This gives the stock of waste of the rasrers on the inclined gutter, on which they will be touched and merged into the cumulative capacity. The yard will remain clean. Walls can be made of natural or extruded wood. The doors from the grid will not give for a large premises of the proper inflow of air. On the roof of the house there is a ventilation pipe, covered with a visor so that there is no precipitation inwards - the ventilation system looks like this.

The cost of the cottage for collins with the automatic heating system is high, it is more often used for breeding decorative rabbits.

Cells for rabbits Mikhailov (video)

Practical Cage for Rabbits from Zolotukhina

Cell drawing for crooks on golden

Nikolai Ivanovich is a rabbit breeding with experience. Studying the behavior of his pets, he noticed that rabbits are defecated for more than the rear wall of their house. In this regard, in the drawings, according to the schemes of the Golden, the floor cell combined. Its main part is wooden, and the back of 15-20 cm is a metal grid.

The national floor, with a slope of the mesh insert 30 ° down, dictates the structural features of the back wall and the location of the cells. The drawing proposed by Nikolai Ivanovich suggests a 3-storey house, 6 adult individuals. Two separate rooms on each floor.

As the developer itself says, in order to build cells for the ramp on his method, the drawings are not required.

Dimensions are approximately such:

1. Cell height - 50 cm;
2. Width - 80 cm;
3. Depth 70 cm.
4. Square door frames. Their side of 40 cm.

Between the cells in the form of expanding iscessed triangles, there are sensures made of metal grid with cells of the same size, which will be used for the manufacture of doors.

Most of the design is wood, only 60-70% of items are made from the metal grid on its front of it. This is necessary for natural ventilation of the room.

If, according to the drawings of Mikhailov, the rear wall deviation is due to the protruding elements of feeders and sumps, then according to the Golden system, each floor performs 20 cm per wall borders. Does not apply only to the first tier of the house. Accordingly, the wall from the bottom will deviate. It will come to the mesh joint with wooden floor elements. This design is needed so that excrement does not fall on the lower neighbor.

Triangular detects are not only a comfortable feeder, but also a separation wall between adjacent rooms highlighting heat. In the rooms of females, you can exhaust the maternity branch. If you need to keep a large number of rabbits, the house can be done longer. The number of cells on the floor is not limited.

Cells for Rabbits Zolotukhina (video)

Decorative houses for rare rabbits

Decorative breeds of rabbits is as resistant to frozen. True, they are bred as pets. For a decorative rabbit and a lodge is required to be appropriate. For any such animal, green grass is a favorite delicacy. When the content of rabbits in highly located cells, animals lose the joy of fresh grass.

There is a solution to ensure the rabbit in the summer fresh feed. To do this, right on Earth it is necessary to install an avoire from a metal mesh, a lodge, which will be located like any rabbit cell at high columns. For the frame for the mesh fence and the roof base is the most convenient to use metal profiles. The top house is made according to the standard parameters. Ventilation is performed through the door with the grid. The exit for a rabbit from a house in Wolter is a sloping board with the crossbars featured to it.

The most convenient for rabbit is a masterpiece installed in the aviary. In this hidden corner of the rabbit will be able to calmly grow off the offspring.

Step-by-step construction of rabbits (video)

With production breeding rabbits, mechanical feeders are used, heated drinkers. Only rabbits there are not so free as home. Although general principles of content are kept on large farms. The calculation of the place for rabbits-giants is slightly different in view of their bodies.

Let's talk about secrets ...

Have you ever been pain in the joints? And you do not care what you know what:

• the inability to move comfortably and easily;
• pain during or after exercise;
• discomfort with rages and descents on the stairs;
• inflammation in the field of joints, swelling;
• unpleasant crunch, clicks are not on your own accord;
• unbearable and unbearable new joint pain ...

Please answer the question: does it suit you? Does such pain be tolerated? How much money did you already "merge" for ineffective treatment? It's time to finish with it! Agree? Today we publish an exclusive interview with Professor Dikulem, in which the doctor revealed the secrets of getting rid of pain in the joints, the treatment of arthritis and arthrosis.

ATTENTION, only today!