The natural economy has always been profitable. You can also contain kernels, and pigs, and goats, but rabbits always used much popularity, since they are unpretentious and do not require special feed. But for them, special cells are needed for rabbits, it is not necessary to keep these animals in the barn of these animals.
Cell dimensions
Before building cells for rabbits, you need to find the drawing by which you will work. On the Internet you can find ready-made or draw the drawing yourself. To do this, you need to know the size of the cells for rabbits. Beginners of rabbits should know that for the breeding of these animals they do not have enough single cell. It is necessary to several houses for rabbits, at least three.
For adult rabbits
Two adult rabbits will fit in a house of two sections. Its minimum dimensions: length - 140 cm (better 210-240 cm), in width - 60-70 cm, height - 50-70 cm. Between two branches is a feeder for grass and hay. A rabbit house can be done in two floors, which will help save space.
House of two sections for adult rabbits
Cage for young man
In the cells rabbits, namely for young, rabbits are kept by groups. Making cells is simple: minimum dwelling sizes for young people: 200-300 cm per 100 cm, height - 35-60 cm. On one animal of young people should account for at least 0.12 square meters of the square. Sometimes for young people do not make individual cells, but kept in ordinary, for adults, counting on the number of individuals in the area necessary for them.
Lodge for rabbires with ranks
The house for rabbits with children, for dilution consists of aft and uterine parts, which are separated by a partition. It has a LAZ. It should be located just above the floor (10-15 cm) so that rabbits could not get out of the nest. Dominics for rabbits (royalties) has a size of 0.4 per 0.4 m and a height of 20 cm. It is put in the uterine compartment in front of the eye. Here is an exemplary drawing of a cage with royalnik.
Cell Drawing
For rabbits-giants
The size of the cell depends on the size of rabbits-giants. If you purchased giants, it will be closely in standard aviaries, you need large houses. For breeding rabbits-giants, a housing is needed with a width of 0.75 m, a height of 0.55 m, and a length of 1.7 m. This is a minimum, it would be nice to make it larger.
Cell manufacturing rules
If you decide to independently build cells for rabbits with your own hands, you need to know some rules so that after a few months I did not have to do a new one.
- Rabbits are rodents, so those who want to keep cells for rabbits, all parts of a frame of wood, which are located inside the cage, better protect the metal. It takes only a few hours, but then the cell rabbits then will last for 10 years longer.
- Antiseptic cannot be used. Pets can choose.
- The roof should not suffer from moisture. It is better to use slate for it. If your rabbits live on the street, do not make a metal roof. Under the influence of the Sun, it is split, and animals will be uncomfortable in this stuffy space.
- For rabbits, rabbits are used for rabbits (50x50 mm). Can be made of metal. For the trim, a chain grid is suitable, the cells of which are 25x25 mm. The grid is needed for the facade, for sidewalls of houses and doors. The back is always deaf, because They are harmful to the draft.
- In order to build the floor, take a grid with cells 25x25 mm or 10x25. Because of this, the feces do not accumulate inside the cell, and is assembled into a special bunker or on the inclined rolling to the ground. The solid floor in the rabbit you will not see.
During the construction of cells for rabbits, some rules must be followed.
Rabbits have a very caustic urine that absorbs into a solid floor and leads to rotting wood. If not a grid, then the floor can be covered with bars, between which there are gaps of 0.5 - 1 cm. Experienced rabbits advise at the floor a small sheet of plywood. Then rabbits will not be subteramatitis. But it must be constantly removed and washed, dried.
How to build a cell for rabbits
If you want to build correctly with your own hands, you will help you step by step instructions. This is the simplest cell that can be kept only in indoor rooms. For this instruction, it is possible to produce cells to rabbits and for the street, but using an OSP.
The drawing can be done by itself, focusing on the sizes of the cell rabbits: the size is 1.5 by 0.7 m and the height of 0.7 m. But it is desirable to make the cells with rabbits pair, which saves the material, so the framework is taken as the basis of 0.7 m, in front of 1.2 m, and behind 1 m. Making a drawing of such a cell is not difficult.
How to make a cage for rabbits with your own hands? Here is a step-by-step instruction. Prepare all the necessary materials:
- plywood, 2 sheets (* 1.5 per 1.5 m), in thickness - 10 mm;
- bruks, 10 pieces: length 3 m, 30 * 50 mm;
- metal grid with cells 15 mm, 3 m;
- self-tapping screws 30 and 70 mm, 2 kg;
- tools for work.
Making framework. On a solid smooth surface, we collect a frame with a size of 3 m at 0.7 m and a height of 1.2 in front and 1 m behind the design. The frame must be on the legs.
On the floor of the future cell, secure the grid, it may not reach the edges of the cell, because There will be a masterpiece. Floor Musician solid.
We make the back wall: cut it down in size and attach to the screws across the area. Plywood sheets to fix around the edges of the cage, where there is no grid - it is future royalties.
Start work on castresses. To do this, attach the bar located vertically, and fasten the wall to it, in it according to the rules to make a LAZ. Bruks are attached to the walls of the royalties, and the matronic cap is fixed on them.
Cell for rabbits: Mastery manufacturer
Making feeders: need to make a feeding device. In the middle of the cell, the vertical lumps are fed, two feeders are added to it, 7 cm high, and a width of 30 cm. Two vessels are attached at a distance of 20 cm, these are guides. From plywood you need to make a frame for feed, a special device, the top of which fits between the guides, and the bottom sits right into the feeder.
Cage for rabbits: making feeders
Cage for rabbits: Feeder installed on the frame
Next to the main feeder is equipped with a feeder for hay, which is made from steel wire.
Cage for rabbits: Feeder for hay
Free space we are trimmed by plywood, install the roof, which has a five cm in front and 10 cm from each side and rear. In the middle there should be a hole in which feed will be laid. From above, it is better to install the lid so that rodents do not fall into it. It remains only to install the doors of 30 by 50 cm. For their manufacture, you need a grid. Cell is ready.
If this cell production scheme for rabbits don't like your own hands, there is a detailed video instruction. There is a step-by-step explanation. True, the drawing will have to do it yourself.