Making knives from paper has recently captured people of all ages. And if for a child a made knife is just fun, then for adults paper design becomes a very interesting hobby. Are you one of them too? Then take note of our advice, call the children to help you and start making your favorite model of bladed weapon.

How to make a knife from colored paper

This knife is easy to make, looks like a real one and is safe to use. Prepare a sheet of office paper and scissors.

• Fold the top edge of the sheet at a corner, cut off the excess rectangular strip to make a square. Fold it lengthwise three times, pressing along the folds until you get a flat blade stick.

• Round one end of the base like a kitchen knife. Fasten the workpiece with a stapler. Fold the remaining piece of paper 3-4 times - this is the handle.

• Connect both parts of the weapon with brackets and get a knife. It can be colored with paints, felt-tip pens or pencils.

How to make a kunai knife out of paper

A kunai is a leaf-shaped Japanese dagger with a handle ending in a ring. Initially, the knife was used as a sharp garden tool, then as a weapon of ninja warriors.

• Fold the sheet diagonally. Fold the resulting triangle in half, iron the seams and unfold the base. Press the sides of the workpiece to the middle line. Bend the resulting figure into a triangle, and tuck the protruding tails inside the spear-shaped blade. Press your fingers on the opposite sides of the resulting pyramid, and the figure will become three-dimensional.

• Roll the second sheet into a tube, fasten it along the entire length with tape and insert it into the hole in the tip. Flatten the handle by flattening it with your hands.

• Twist the paper strip several times to create a ring, then tape it to the handle.

• Place a couple of coins in the tip to weigh down the weapon and seal the junction of the tip with the handle with duct tape. The work is done - you can put the craft into play.

How to make a pirate knife out of paper

A knife for a game or theatrical performance can easily be made from cardboard.

Find a sample of the desired shape, make a sketch and cut out a double stencil from cardboard. Glue the two halves of the template together, then paint the product with watercolors or cover it with silver paper.

How to make a butterfly knife out of paper

It’s not easy to make a folding balisong out of paper, but the time spent will be more than repaid by the admiring exclamations of your children - because the toy knife will spin like a real one. For crafts, take: colored and plain paper, glue, scissors, a stationery knife.

• Roll a sheet of white paper into a tube, flatten it and use scissors to shape it into a blade. Secure all layers with tape. Draw dotted lines and cut the workpiece along them.

• Make markings as in the photo.

• Cut according to the outline and open the parts to the sides.

• Roll 4 white thick tubes from a standard A4 sheet and one red one, wrapping the white straw in red paper.

• Cut two wheel-like pieces from the red blank, equal in width to the wing-ears on the blade. Lubricate the wheels with glue and wrap them inside both ears.

• Tie three white tubes with tape, cut them according to the length of the blade and place them in the blade case.

• Insert one red straw into the hole at the base of the blade, and glue the second with the ends inward.

• Strengthen the handle with a white tube of the required length. Repeat the same steps with the second handle and the dummy knife is ready.

So, you have mastered the theory. Now try to make a knife, starting from a simple model and moving on to a more complex one. For a better understanding of the process of making weapons from paper, watch the video on the topic.

You just learned how to make a knife out of paper with your own hands, and now let’s look at how to make a cover for it out of paper. This process is labor-intensive, because the knife must be easily removed from the sheath.

1. Trace your knife on a piece of paper, leaving a margin of 1 centimeter along the contour.
2. Wrap the paper around the knife and trim off the excess with scissors.
3. To ensure that the paper knife glides well, cover the inside of the case with glossy paper.
4. Glue the cover along the outline.
5. Make a hanger out of a rectangular piece of paper and glue it to the outside of the case.
6. The sheath for the paper knife is ready.

Karambit

Karambit is a very beautiful knife, it has a curved blade, it is held on the reverse side by inserting a finger (index or thumb) into the ring. How to make such a miracle knife out of paper?

1. Prepare a drawing of karambit or print it out.
2. In the picture, divide the karambit with a marker into three parts: along the blade of the knife and in front of the ring on the handle.
3. Cut out all three pieces separately.
4. Let's make a handle. Take a colored sheet of paper and fold it in half 3 times. We apply the handle template to the resulting rectangular package and cut it out from the side where the fold of our rectangle is located. We glue all layers of the handle together without touching the central sheets.
5. Making a blade. Fold the white paper in half 3 times and cut according to the template so that the fold line is on top of the blade. Glue all parts except the middle sheets.
6. Using a pen rod, make a twist from a square sheet of paper and secure the end with tape.
7. Assembling the knife. Attach the blade to the handle and cut a stick from the tubes to the required length to connect the two parts. Cut another tube, but a little shorter. Glue both tubes into the blade and handle so that the sticks fit into the handle at an angle (spread apart).
8. Finally, we roll up a square piece of paper and form a ring. Glue the ring to the handle.

Stationery knife

Unusually, but very interestingly, you can make a stationery knife out of paper with your own hands.

1. Fold a vertical piece of white paper in half and cut it. Fold a strip 2 cm wide and bend the sheet, do this until the end of the sheet. Secure with tape. Draw the tip of the knife with a marker and cut it out. Glue all the layers of the tip of the knife blade together.
2. Take colored paper, fold it in half and cut it. Make a bundle with colored paper, as you did with white paper (you will need 2 of these striped bundles). Take the second half of white paper and make a roll of strips 1 cm wide (you will also need 2 of them). On the colored bundle, make a cutout for the knife slider. Make the corners of the knife body more rounded.
3. We glue together according to the principle of a box: thin strips - the sides of the knife, colored strips - the front and back sides. Insert the blade package inside.
4. Make a slider from cardboard folded in several layers and glue it to the blade inserted into the body. The knife is ready.

As you can see, all ingenious is simple. A knife made by yourself will give a child bright impressions, and if you make this origami together, then the child will be captivated by this wonderful activity.

Today it is very fashionable to manufacture products based on paper. Toys of this type can completely replace real ones. Take, for example, pistols or knives. Unlike plastic options, paper ones are safe, which is primarily important for children. One of the main attributes of toys for boys is a knife. We recommend that you read the instructions below and learn how to make a knife out of paper.

Knife made of multi-colored paper

To begin with, we will tell you how to make a knife from colored paper. To construct this model of a children's toy, you will need an A4 sheet, a stapler (can be replaced with tape), and scissors.

Making a knife:

1. We take a sheet, carefully wrap any of the corners, but the edges of the sheet should match. Having made such a fold, you should get an open triangle, cut it off, unfold the workpiece and see a square in front of you. We bend the square three times, while ironing the folds well.
2. Now we take scissors and make all the edges semicircular, like a kitchen knife. To prevent the workpiece from falling apart, it must be secured with tape or a stapler. Now we take a piece, bend it along its length several times, fix it with the same tape and get the handle of our knife.
3. Next you need to combine 2 blanks into one solid object. After joining, the craft can be painted.

So we told you how to make a simple knife out of paper. Now you can start making a more complex model.

Kunai Dagger

One of the serious paper products can be called a Kunai knife. The paper art of origami is used to construct it. Before you begin the manufacturing process, you need to find two landscape sheets and several sheets of colored paper.

How to make a ninja knife from paper:

Kunai Dagger

1. We take a landscape sheet as a basis, fold it and get a triangular shape. Fold the resulting triangle in half, and then unfold the workpiece to its original position.
2. We wrap the corners to the center line and fold the craft in half. Next, we have protruding ends, which we bend into the resulting pockets and thus form the blade of our future craft.
3. Pressing the edge in the shape of a pyramid with your fingers, we lift the paper a little to achieve volume. We take a second sheet of paper, roll it into a tube with a small diameter and insert the blade five centimeters deep.
4. Next, use your fingers or a sharp object to level the edge of the tube and repeat folding several more times. A handle with a tip should form. At the end, we fix the craft.

Many people want to make the craft heavier and put a coin or pebble in the middle. This is how a ninja knife is made, there are many more options for making knives. Many are trying to learn how to make karambit from paper, we will also tell you about that, but a little later.

Pirate knife

The design of a knife is carried out using the following tools and materials:

• cardboard, preferably white;
• a simple pencil;
• bolt with nut or rivet;
• glue and needle.

Manufacturing process:

Sample

• download the template, print it and cut it out;
• take white cardboard, apply the cut out elements, trace them with a pencil, and cut them out too;
• now we take a needle and pierce the blade, body and saw at once, take out the needle and insert a bolt or rivet;
• Next, we take glue and drip a little onto the workpiece, but it is worth considering that the blade should not be in the glue;
• then we place one part of the body on the other and fix the workpiece.

The knife is ready, now you can decorate it, if you wish, of course. So we have made the main versions of knives, now we will tell you how to make a karambit knife out of paper.

Karambit

Before explaining how to make karambit from paper, you need to find paper for schematic drawing, a glue stick, and scissors. Boys who play computer games will be interested in making a model themselves. The manufacturing process is very simple:

Sample

• download and print the knife drawing;
• Using scissors, we cut out all the parts, apply the blanks to drawing paper and trace them with a pencil, while the base needs to be traced eleven times, and the handle twelve times;
• cut out the outlined elements, glue all the parts and place them under a press (or under heavy books);
• now we take one part of the handle and glue it to the blade;
• Having coated the second part with glue, close the other side of the blade.

At the end, we paint the craft and cover it with colorless varnish.

Knife like an Assassin

This model of knife can be made without a template. You will need eight album sheets and tape.

The knife is made in this way:

The knife is ready. Your child will probably ask you how to make such a paper knife 232 times, and maybe more, because the toy turns out to be excellent. In addition to it, you can make sure that the warrior is ready for battle. We described earlier how to make shuriken.

When playing with such a knife, the child will be safe and will not be injured during the game, and this is a guarantee of peace of mind for parents. It’s better to make any of them together with your children; they will really like this activity.

Nowadays it is considered very fashionable to be able to make all sorts of things out of paper, especially if you use rare techniques. Such items can be an excellent alternative to the real thing, but at the same time be completely safe. This is especially important when it comes to children who are planning a game involving knives. Also, our tips on how to make a knife out of paper will help participants in masquerades and theatrical performances find inexpensive and suitable props.

Content:

Knife made of colored paper

The simplest model of a knife is made using a regular sheet of A4 size, double-sided tape or a stapler and scissors.

Follow these steps:

Making a ninja dagger (kunai) from paper

To make such a superhero knife, you should use the origami technique.

Before you start, prepare two regular office sheets of white or colored paper.

Completing of the work:

The ninja dagger is ready.

Advice! If you want to make your paper weapon a little heavier, place pebbles or coins inside the blade.

Pirate knife

A pirate knife for a children's game or theatrical performance is best made from cardboard.

On a cardboard sheet of the required size, draw with a pencil the shape of a pirate's bladed weapon and cut it out. Then attach the cut out sample, trace it on the cardboard and cut it out again. Make sure all edges match.

After the 2 parts are ready, you need to glue them and paint them. Or you can wrap the blade with shiny foil and cover the handle with colored paper.

Making a butterfly knife out of cardboard

When starting to create this type of knives, you should know that this is not an easy task, and it is also time-consuming. But the result will surprise everyone, including children. The paper version will be exactly the same as the real one.

To work you will need the following materials and tools:

• White paper;
• colored paper;
• scissors;
• glue;
• stationery knife.

Take a sheet of white paper, A4 size, and roll it into a tube, smooth it out. Trim the ends to create a blade. To prevent the structure from unfolding, attach it layer by layer with tape. Draw dotted lines. You need to cut the future craft using them.

Looking at the photo above, mark the workpiece.

The next step is to roll out white sheets (4 pcs) of A4 and red (1 pc) tubes. Place the white tube into the red one.

The red tube should be used like this: 2 identical parts resembling wheels are cut off from it. You need to apply glue to them and connect them by winding them inside one and the other ear.

Mark a hole near the base of the blade. You need to insert one red tube there. And the ends of the second red tube are glued with the tips inward.

To make the handle stronger, glue a white one to the red tube, maintaining the length. Repeat the above on the other side of the handle.

You should end up with a paper version of the butterfly knife.

There is another option for creating a butterfly knife, which uses cardboard or foam board.

The first step is to download the template and then print it.

Let's get to work.

The work on the knife is finished.

Folding Swiss knife made of cardboard

The knife got its name because it was in the Swedish army that they carried such a red bladed weapon. Now we will make a knife - a postcard, which can be used both in the game and as a souvenir.

Each boy in the toy box has attributes such as plastic guns, swords, knives. And very often, manipulations with such dummy weapons are a cause for concern for parents, because the child can injure himself or harm other family members and pets. But is it possible to prohibit a future man from having a toy weapon in his arsenal? Of course not. And so that such entertainment is safe for the health of all household members, we suggest you learn how to make attributes for games with your own hands from scrap materials.

Learning to make toy edged weapons from paper

In this article you will find information on how to make a knife out of paper. Readers are presented with two ways to perform this accessory.

The first model was made using the origami method. A paper knife according to the following description is simple and quick to make. Even a child can easily master this method of making toy weapons. The second version of the knife is made using the papier-mâché method, which children can also do. So, here are the master classes.

How to make a knife out of paper using the origami method?

To work you will need A-4, scissors and a stapler.

When making this model, you can use tape instead of a stapler. To add rigidity to the craft, you can insert a wooden ice cream stick into the blade part.

We make toy weapons from papier-mâché

Do you want to know how to make a knife out of paper this way? Then study the description. We prepare the following materials for work:

• wooden blank of appropriate shape;
• newspapers;
• bowl of water;
• PVA glue;
• sandpaper;
• paints;
• acrylic lacquer.

Cover the blank or finished plastic toy with wet pieces of newspaper in one layer. Next, dilute the glue with water and treat the paper for the next three tiers with this solution. And glue the last layer with clean PVA. Leave the craft until completely dry. Then carefully cut it, take out the shape, and glue both paper parts together. When the product is completely dry, clean it and paint it. And the last stage of work is processing the craft with varnish.

You have learned two ways to make a knife out of paper. We hope that you will find them useful, and very soon your son will be playing with an original, and most importantly, safe toy.